gaismas noma ballītēm
Šīs būs īstās gaismas tavam pasākumam, ja vēlies radīt īsto ballīšu atmosfēru. Lielisks variants gan nelielām viesībām kā arī lieliem pasākumiem.
- 4-in-1 DMX light effect bar with laser, 2 rotating LED derbies, 2 LED spots and strobe LEDs in white and UV
- Enhanced version with very high brightness and additional UV LEDs
- Laser class 2M: does not require additional protective measures or appointment of a laser safety officer
- Ultra-light ideally suited for mobile use
- Crossbar with integrated DMX control unit and stand sleeve
- Comes pre-assembled with practical transport bag
- Convenient control via wireless foot switch and IR remote control
- 2 laser diodes project hundreds of red and green laser beams
- 2 rotating derbies for mirror ball effects with 6 bright LEDs (red, green and blue) each
- 2 spots with 6 bright 3in1 LEDs (red, green and blue) each
- Strobe effect with 4 bright 2in1 LEDs (white and UV)
- Auto, music, master/slave and DMX mode
- 39 built-in auto and music show programs that include all 4 effect units
- Addressing and setting via control panel with 4-digit LED display
- Sound-control via built-in microphone with sensitivity control
- Swivel mounting brackets for truss mounting
- When fog is used, this effect becomes especially attractive
- IEC terminals for power linking up to 8 units
- Switch-mode power supply for operation between 100 and 240 volts
- LED: Spot 2 x separate controlling each with 4 x high-power 2 W 2in1 BCL CW/UV (homogenous color mix)
- LED: Multi beam effect 2 x separate controlling each with 6 x high-power 2 W RGB
- LED: Strobe effect 6 x separate controlling with 6 x high-power 6 W 3in1 TCL RGB (homogenous color mix)
- Can be operated in 3; 5; 10; 28 CH mode
- Control: Sound to light via Microphone; Wireless footswitch; IR remote control; Stand-alone; DMX; preprogrammed in EASY SHOW
- Effect: Multi beam effect; Strobe effect; laser
TECHNICAL SPECIFICATIONS
- Power supply: 100-240 V AC, 50/60 Hz
- Power consumption: 150 W
- IP classification: IP20
- Power connection: Mains input IEC connector (M) mounting version Power supply cord with safety plug (provided)
- Length of the cable: 3 m
- Power output: 1 x IEC connector (F) mounting version
- Fuse: 5 x 20 mm, T 3.15 A
- LED: Spot 4 x high-power 2 W 2in1 BCL CW/UV (homogenous color mix)
- Multi beam effect 6 x high-power 2 W RGB
- Strobe effect 6 x high-power 6 W 3in1 TCL RGB (homogenous color mix)
- Flash rate: 0 – 30 Hz
- DMX channels: 3; 5; 10; 28
- DMX input: 1 x 3-pin XLR (M) mounting version
- DMX output: 1 x 3-pin XLR (F) mounting version
- Cable construction: 3 x 1.0 mm² H05VV-F
- Cooling: Cooling fan
Control:
- Sound to light via Microphone
- Wireless footswitch
- IR remote control
- Stand-alone
- DMX
- preprogrammed in EASY SHOW
- Beam angle: 13°
- Beam angle (1/2 peak): 13°
- Housing color: Black
- Width: 132 cm
- Height: 32 cm
- Depth: 14.5 cm
- Weight: 10.75 kg
- laser
- Laser color: 2in1 BCL RG
- Laser class: Class 2M
- Laser module: R red 100 mW 650nm
- G green 30 mW 532nm
Foot control
- Battery: 1 x 9.0 V E block 6F22 zinc carbon included
- Remote control @@artlu
- 1 x Button cell 3.0 V CR2025 lithium manganese built-in
CENA
Cena uz 1 diennakti – 50 Eur
Cena uz 3 diennaktīm – 80 Eur
Cena uz 7 dienaktīm – 150 Eur
Cena uz 30 dienkatīm – 300 Eur
INFO
